Clock pulse divider

When playing around with the modular I use quite many clock pulses. These should be in sync but with different division, therefore I made this simple divider. It's original design was made by Mathias Herrmann for his inspiring Fonitronik. However, his design gives inverted outputs, which I changed to normalized outputs. Also I added a start-up reset pulse, to ensure that all outputs are low when the modular is started.

Unfortunately there are no building instructions for this module, but at least you'll find the schematic, some photos, and some comments.

Schematic

    The finished muxiple, mounted in the modular.

That's it! Have fun, mix and divide your clock signals!

/Niklas

Updated - 2014-02-06 08:48
Valid XHTML 1.0 Strict