This project is a dual voltage controlled amplifier. It has one signal input with level adjustment, two CV inputs (one with level control), and one control for initial level. The VCA is based on the ASM-1 VCA.

Unfortunately there are no building instructions for this module, but at least you'll find the schematic, some photos, and some comments.

Component placement for stripboard. Note the red square which indicates that you need to bend that connection.
  1. The VCA during the build.

  2. Yet under construction.

  3. The VCA mounted in the modular.

That's it! Have fun and attenuate!


Updated - 2014-05-23 15:58
Valid XHTML 1.0 Strict